ACE - Receiver Blocks and Stock Parts

For more information call (530) 346-2492 or email us at aceltd@nccn.net

ACE Modular Stocks provide a custom fit for every application
For Dealer pricing or technical information, call (530) 346-2492

Any ACE Modular stock will fit any ACE Receiver Adapter. Any ACE Modular Stock can be made into a side folding stock by screwing a Folding Stock Mechanism between the Receiver Adapter and the Modular stock.



Robinson Armament VEPR Receiver Block An ACE Exclusive! Robinson Armament VEPR Receiver Blocks are finally in! These VEPR receiver blocks have clearance machined in to it to fit the Krebs customized VEPR's (KTR). Will not fit early wooden thumb hole type VEPR's. This receiver block extends 1/8" (.125") from the back edge of receiver. Use this information to determine the over-all length of the stock needed to meet your requirements. Note: you must cut off the tang on the receiver to install this receiver block. AKRBV...............$40.00 VEPR Folding Stock Kits include: Your choice of AKFX(_) skeleton stock, M4M six position stock and UL-M Ultra Light Modular stock, receiver block (AKRBV) and folding mech. (FSM) a 1 1/4" sling mount and a 1/2" recoil pad. AKRBV-(stock)-FS...........$164.90.

Folding Stock Mechanism Fits between the front of fixed stock and the receiver block .By inverting the FSM the stock can be made to fold left or right. Adjustable for comb height .500" ( vertical adjustment ). Precision machined from 7075T6 Billet. Heat treated and hard anodized for maximum wear resistance and strength. Locks tight. Can be "pulled open" for rapid deployment of stock. Length .700 . Weight 74g ( 2.7 oz. ). Check Local, State & Federal Laws before installing a folding stock on you weapon. FSM.........$59.95

Folding Stock Mechanism SMG Drilled and tapped for a sling mount. Includes 1 1/4" sling mount. For use with ACE receiver blocks that do not have a sling mount, like HK MP5KPDW, or MP5. FSMSMG..........$64.95

CAR15 Stock Block "Pig Nose" Adapts CAR15 Carbine style collapsible stocks and the ACE AR Boom Tube stock and the AR Ultra Lite stock to any receiver adapter block ACE manufactures. PN:..........$19.95

AK Milled Receiver Block For all Bulgarian milled receivers and pre-ban milled receivers with the lower tang removed. Includes 1 1/4" sling mount. Length 1.480" F.B.E.R. Weight 190g ( 6.8 oz) AKRBB..........$ 40.00

Ak Milled Internal Receiver Block for Milled Receiver AK milled internal receiver block for milled receiver for all common milled receivers, (Including Bulgarian and Arsenal and Chinese). Modification of receiver necessary, both upper and lower tangs need to be removed. AKRBMC..........$35.00

Internal Receiver Block The ACE Internal Receiver Block requires modification to the receiver; i.e.. the tang on the back of the receiver must be cut off then filed or ground smooth. The internal receiver block will then simply bolt into the receiver. It will be connected at the stock screw hole on the inside of the receiver and the pistol grip "T" nut will hold the front of the receiver block. There is no movement to the receiver block once it is installed. Fits most common stamped receivers, 1mm and 1.6mm. AKRBC..........$35.00

AK Universal Receiver Blocks For all common stamped receiver AK's. Such as Chinese Type 56 and MAK 90, Romanian SAR, Hungarian, Russian/ Siaga, Egyptian Maadi. Length extends 1.535" 'from the back edge of receiver' (F.B.E.R.) AKRBU is drilled and tapped in two places to allow the stock to be mounted higher for use with optical sights. Includes a 1 1/4" sling mount which can be mounted on the left or right of the rifle. Weight 180g ( 6.42 oz) AKRBU..........$ 35.00

AR 15 Receiver Block Can only be used with short bolt-carrier alternate recoil systems like Olympic Arms OA 93. Or with most .22 conversion kits. Or the ARRB may be used with the Revelation Arms M11/9 , M10 receiver adapters. Length .375" from back edge of receiver. Weight 48g. ( 1.7 oz) ARRB..........$ 45.00

AR180 Receiver Block Modification to receiver is necessary. The stock support must be cut down to approximately .450" then the AR180BB securely installs with one screw. AR180BB :..........$35.00

Daewoo DR200 & 300 Receiver Block This is the new 2006 Daewoo Receiver lock. This grip uses the ACE US-Made Daewoo K2 style pistol grip (sold separately) Daewoo Receiver Block DRRB............$40.00 Daewoo DR200/300 pistol grip PG-DR............$20.00

FAL Receiver Block Attaches to all common metric lower receivers with out modification. Looks best on FN and Imbel lowers. This receiver block allows use of any of ACE's fixed or folding stocks, including: skeleton stocks in three lengths (AKFX(__)), M4 Six position modular stocks (M4M), M4 SOCOM(M) modular and the Ultra light modular stock (AR-UL-M). FALRB..........$45.00

HK 91 Receiver Block Fits all common HK 91/G3 variants. Length .500 F.B.E.R. Includes buffer. Weight 140g. HKRB91..........$40.00

HK 93 Receiver Block Length .500". Use SMG Folding stock mechanism / 1 1/4" sling swivel. Weight 140g ( 5 oz) HKRB93..........$ 50.00

HK 94 Receiver Block Fits the HK 94 and MP5 variants. Use SMG Folding stock mechanism with sling mount. Length .375" Weight 90g (3.2 oz) HKRB94..........$ 60.00

HK MP5 Receiver Block MP5KPDW receiver block attaches to all common variants with out modification. HKMP5KRB..........$45.00

M11/9 Receiver Block Can be used with any modular ACE stock. M11/9RB:..........$24.00

M96 Robinson Armament M96 Receiver Block Machined from 7075-T6 billet. Includes 1 1/4" sling swivel that can be mounted left or right. Some fitting may be required. Length 1.0. Weight 80g ( 2.8 oz ) M96RB..........$ 45.00

Saiga Rifle and Shotgun Receiver block, Grip and Sling Mount. US made. Includes all mounting hardware. SiagaRB..........$64.95