Super Heavy Duty ACE M4-7

You are in a combat situation. You dive into a ditch and land on your rifle. You bend your receiver extension tube slightly (as little as 2 degrees). You return fire... first round, rifle malfunctions and your bolt carrier is stuck in your receiver extension tube. Worse, the stuck bolt carrier will not allow you to field strip your rifle and clear the malfunction. Don't let this happen to you! Buy an ACE M4-7 or a M4-7 RET. M4-7 and M4-7 RET. Patent pending.

1. Gusset reinforced receiver extension tube (RET) is many times stronger than the current issue mil. spec. RET. A tapered RET and gusset reinforce the receiver, and when the gusset screw is tightened the gusset is pulled tight into the receiver.
2. Laser etched delineations, ensure a visual confirmation of your stock's position.
3. Seven position for the perfect fit. RET extends out to 11.0" long in seven 5/8" increments. Fully collapsed it is the same length as any other M4 six position stock- 7.3".
4. Adjustable screw in stainless steel stops, allow repeat adjustment to the same position every time in any conditions.
5. Adjustable shim screw-in RET allow slop and rattle to be adjusted out of the stock.
6. Four sling positions. "Ambi" single point, top and bottom.
7. Includes SS-AR, rubber coated, 360 degree, 1 1/4" sling swivel.

M4-7 Black..........$99.95
M4-7 Coyote Brown.........$99.95
M4-7 OD Green..........$99.95

M4-7 seven position heavy duty commercial size Extension tube. Fits Calvary ARMS , Rock River etc.  MOD  type stocks.

With ACE SS-AR sling mount M4-7 RET-SS-AR....................$72.00
With ACE Uncle Mikes push button sling mount M4-7 RET-SS-AR....................$72.00

Heavy duty commercial size 7 position, MOD stock type, extension tube with, laser etched delineations, machined gusset, removeable stops and ambi sling mount. Note: will not fit VLTOR, Colt or LMT stocks. We plan to have the smaller (weaker ;)) tube available for these stocks Aug. '06.

M4-7 RET-SS-AR (with rubber coated AR type 360 deg. sling mount)..........$72.00
M4-7 RET-UM-PB (with UM push butto QD 360 deg. sling mount)............$72.00

M4 SOCOM

Designed with input from combat experienced SF soldiers. This is the strongest production AR15/M16 stock available! Approximately 6 times stronger than an AR15 A2 stock & receiver extension tube. Ideal for CQB or breaching doors, and without the fear of bending the receiver extension tube ( which disables the rifle ). Adjustable length of pull, adjusts from 7.5" to 9.5" in five 1/2" increments. The M4 SOCOM comes with extra hardware so that it can be set up to be a rock-slid fixed (non-adjustable) stock. This set-up is ideal for dynamic entry, extreme CQB or large caliber AR conversions.  Closed-cell foam overtube provides an extremely comfortable cheek weld. This stock mounts "rock solid' to the rifle with no movement making it an ideal stock for precision shooting as well. Ambi-sling mount / gusset reinforces the receiver extension tube at its weakest point- just behind the receiver. Four sling positions allows optimum sling mount flexibility. With the 1.0" pad it is also ideal for use with .50 BMG AR uppers. Comes with your choice of 1.0" or .5" recoil pads. Uses carbine length buffer and spring ( not included ).

New M4 SOCOM '06. Has the following updates: removable, ambidextrous ss-ar sling swivel; tapered extension tube and gusset; larger stronger clamp screw; improved slide key; square taper locking plunger.

L.O.P. fully collapsed 11.0 " and fully extended 13.0" without recoil pad. Weight: 460g (16.5 oz)

M4 SOCOM - Black Anodized.........$ 199.95

M4 SOCOM (L) ACE's infamous super heavy duty stock is available now with a full length receiver extension tube. Uses an A1/A2 buffer and spring (not included). Can also use pneumatic recoil systems and on all .308 (7.62 X 51mm) AR type rifles. Length 9.5" to 11.5" in five 1/2" increments. Length of pull from 11.5" to 13.5" measured with out recoil pad. A 1/2" recoil pad is included. Foam cheek rest is approximately 6" long.

M4S(L).........$220.00

ACE Logo 6 Position M4 Stock

ACE logoed, all US made parts, M4 six position stock. Uses CAR (carbine) length buffer and spring (not included). Your choice of black, coyote brown, and OD green.

Sale price until August 2006............. $49.95
Buffer and spring for above with purchase of stock only. B&S-CAR.............$12.00

The AR15 Skeleton Stock - ARFX. The ARFX is 3.6 oz lighter than the A2 stock, while still retaining high strength and durability. A closed-cell foam "overtube" provides a super comfortable cheek weld, and it insulates the shooter's face from vibration and temperature extremes. The ARFX also sports three sling positions: right and left behind the receiver and one at the toe of the butt. Uses a standard A1/A2 receiver extension tube, buffer and spring ( not included ). Includes .5" thick rubber "over-mold" recoil pad. Can be installed on " Post Ban" rifles.

Over all length 9.8". L.O.P.= 13.0" ( without recoil pad ). Weight: 296g ( 10.9 oz)

ARFX - Black Anodized.........$ 89.95

ARFX Entry stock. This stock is only 7.25" long without recoil pad; yet is strong enough for its intended purpose "Close Quarters Battle." CQB usually involves heavy armor and the need for a stock that can be used to breech light doors or in hand to hand combat. Uses CAR length buffer and spring (not included). Special receiver extension tube, Sling swivel, foam overtube and choice of .5" or 1.0" recoil pad are included.

Length 7.25". L.O.P.=10.45" (without recoil pad ) Weight: 265g ( 9.7 oz)

ARFX-E with .5" recoil pad - Black Anodized.........$ 99.95
ARFX-E with 1 " recoil pad - Black Anodized.........$ 99.95

AR15 Ultra Lite Stock

The lightest AR stock ever devised! Weighs only 142g ( approximately 5 oz )! An AR15 A2 stock weighs 390g ( 14 oz.) This stock also uses ACE's original soft foam over tube for the ultimate cheek weld. A billet machined gusset reinforces the receiver extension tube at it's weakest point- directly behind the receiver. Said gusset also sports an 1 1/4" ambidextrous QD sling swivel. The precision machined aluminum butt clamps directly to the end of the receiver extension tube and also provides a machined in sling mount. Curved rubber recoil pad included. Receiver extension tube, buffer & spring not included. Post ban compliant!

Length without butt pad 9.75". L.O.P. 12.8".

Available in the following hard anodized colors: Flat Black, OD Green.

AR-UL.:...........$89.95

AR15 Ultra Lite Stock-Entry

Same as above except the overall length is 7.125". Uses a special short receiver extension tube - included. CAR length buffer and spring not included.

AR-UL-E...........$107.95

AR15 Side Folding Stocks

Side Folding AR15 stocks can only be installed an AR15's with an alternate recoil system such as: ZM Weapons LR300,
Olympic Arms OA93, most .22 LR conversions, most shot gun to AR15 stock conversions, and  some flare/grenade launcher conversions. These side folding stocks will not work on standard AR15, because the recoil system is in the butt stock.

M4 SOCOM Modular Folding Stock Set

Includes: AR receiver block (P# ARRB), folding stock mechanism with 1 1/4" sling mount (P# FSM-SMG), M4SOCOM Modular, foam overtube, lock ring and CAR stock adapter (P# M4S(M)), and all mounting screws. A CAR lock ring, spanner wrench is useful for installation, and is not included, see below to purchase.

ARRB-UL-M-FS.................$ 269.95

AKFX Skeleton Folding Stock Set

Includes: AR receiver block (P# ARRB), folding stock mechanism with 1 1/4" sling mount (P# FSM-SMG), Skeleton stock with 1/2" Recoil pad (P# AKFX(length)), and all mounting screws. A CAR lock ring, spanner wrench is useful for installation, and is not included, see below to purchase.

LOP = 12.1"  ARRB-FX(SS)-FS..............$149.90
LOP = 13.0"  ARRB-FX(S)-FS..............$149.90
LOP = 14.0"  ARRB-FX(L)-FS..............$149.90

Ultra Light Modular Folding Stock Set

Includes: AR receiver block (P# ARRB), folding stock mechanism with 1 1/4" sling mount (P# FSM-SMG), Ultra Light Modular stock, foam overtube, extension tube and CAR stock adapter (P# UL-M), and all mounting screws. A CAR lock ring, spanner wrench is useful for installation, and is not included, see below to purchase.

ARRB-UL-M-FS..................$149.90

M4 Modular Folding Stock Set

Includes: AR receiver block (P# ARRB), folding stock mechanism with 1 1/4" sling mount (P# FSM-SMG), M4M Modular with lock ring and CAR stock adapter (P# M4M), and all mounting screws. A CAR lock ring, spanner wrench is useful for installation, and is not included, see below to purchase.

ARRB-M4M-FS..................$149.90

Improved AR Pistol Kit

Includes gusset (with new better clamp), receiver extension tube, hardware and 1/4" sling mount (shown middle), foam over-tube (you cut to length). Extends 7" from the back edge of the receiver.

ARP..........$55.00
ARP with buffer and spring (not shown) ARP-BS.........$ 65.00
ARP with buffer and spring and SS-AR 360 degree sling mount ( shown) ARP-BS.-SS-AR.........$ 75.00
ARP with buffer and spring (not shown) and quick detach sling mount. ARP-BS-QD.........$ 65.00

MAGE

Allows any mil. spec. 30 round magazine to hold 35 rounds, or you can leave 30 rounds loaded in the magazine with out fear of the spring "setting". Two holes in the bottom of the magazine extension allow for drainage and to attach 550 cord loop to aid in handling magazines. The operator can also use color coded zip ties to designate type of ammo in that magazine. The MAGE can be removed for cleaning in the field by using a bullet tip to remove the stainless steel retaining clip. Zip tie and 550 cord is not included.

MAGE ..............$5.00

Thin Lock Rring

Thin lock-ring will "lock" extension tubes to receivers, and two used together will ensure that your M4 stock will not come loose! Measures .160 thick.

LR.160.............$7.00
LR.160 (Buy two and save)...........$12.00

A1/A2 Receiver Extension Tube

$19.95

A1/A2 Buffer and Spring Assembly

$22.95

CAR Length Receiver Extension Tube

For ARFX-E & AR-UL-E

$19.95

CAR Length uffer and Spring

.$19.95

Replacement Foam Over Tube for ARFX or AR-UL

$4.00

Replacement Foam Over Tube for ARBT

$6.00

Vertical Grip "K" Grip Profile

Machined from black Delrin. Clamps rigidly to any picatinny style rail with two nylon mach. screws.

Weight 38g.

VG-K-D.........$ 34.95

Vertical grip "K" grip profile. Machined from machined from aluminum and then hard anodized. Indestructible!. Clamps rigidly to any picatinny style rail with two nylon mach. screws. Weight 38g.

VG-K-A.........$ 34.95

Set And Forget Locking Windage Knob

Machined from billet aluminum. Know that your sights are always zeroed, even in rough handling, storage in vehicles, or combat situations. Available in the following hard anodized colors:

Black, OD Green, Desert Tan, Race Gun Red.

SAF.........$17.95  NOW ONLY $10.00